 |
| © 2009 Selden Research Ltd. No part of this site may be reproduced without permission |
| Selden Research Ltd Staden Business Park Staden Lane Buxton Derbyshire SK17 9RZ Tel : 01298 26226 sales@selden.co.uk Registered in England No. 984285 VAT Reg GB 157511665 |
 |
 |
|||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
|||||||
 |
 |
|
||||||||
| dyma >> Floorcare Floorcare >> Floor Strippers |
|---|
| DYMASTRIP | F001 |
||
|---|---|---|---|
 |
|||
| high power polish stripper | |||
| description | Lifts metallised emulsion polishes
For both mechanical and manual operations
Solvent free
Excellent for use as a hard surface cleaner
|
||
| application | DYMASTRIP is a remover/stripper for water based metallised floor polishes. | ||
| directions | Dilute 1 part of DYMASTRIP with 10 parts of clean hot water. Mop this diluted solution liberally onto a section of the floor to be stripped. Allow 10 minutes soaking and then scrub floor with a suitable machine, using, if necessary, a black pad or stiff brush. Mop or wet vacuum the resultant polish/stripper slurry from the floor. Repeat this operation until the whole of the floor has been stripped. The floor must be rinsed thoroughly with water and be allowed to dry before the application of any polish. A little vinegar should be added to the water used for rinsing the floor. This will neutralize any remaining stripper residue. N.B. Do not attempt to strip too large an area of floor at any one time. The stripping solution of the slurry must not be allowed to dry before removal. DYMASTRIP is unsuitable for use on unsealed wood and cork floor coverings. | ||
| Technical | |||
| Composition | A blend of nonionic and anionic surfactants, sodium metasilicate, sequestrants and solubilising additives, in a clear water based liquid. | ||
| Appearance | Clear liquid | ||
| Colour | Ruby Red | ||
| Cloud Point | 40 | ||
| Density | 1.088 | ||
| pH | >13.5 | ||
| Fragrance | Odourless | ||
| Stability | 2 years in a unopened container | ||
| Biodegradability | All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water. | ||
| Flashpoint | >100 | ||
Product is for professional use only. |
|||
| Obtain MSDS |
|---|
Brand : DYMA |
 |
| Obtain Product Information Sheet |
|---|
Brand : DYMA |