 |
| © 2009 Selden Research Ltd. No part of this site may be reproduced without permission |
| Selden Research Ltd Staden Business Park Staden Lane Buxton Derbyshire SK17 9RZ Tel : 01298 26226 sales@selden.co.uk Registered in England No. 984285 VAT Reg GB 157511665 |
 |
 |
|||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
|||||||
 |
 |
|
||||||||
| premiere >> Floorcare |
|---|
| UNO FLOOR POLISH | P01037 |
||
|---|---|---|---|
 |
|||
| description | A 34% ultra high solids, gloss finish emulsion floor polish.
Suitable for use on most hard floors
DO NOT USE ON RUBBER OR UNSEALED POROUS FLOORS (EG. WOOD) |
||
| directions | DIRECTIONS For further information on stripping, rejuvenation and application techniques please refer to the Technical Information Sheet. ● Prepare floor using suitable emulsion polish stripper (Premstrip™ or Strike™) or multi-purpose detergent (MP9™ or MP10™) following product directions ● Apply a thin even coat of neat polish using a clean mop or applicator ● Allow polish to dry (30-40 minutes) ● Apply second coat at right angles to the first leaving a 10cm gap around the edges ● If further coats are required please refer to the Technical Information Sheet, section – multi-coating ● Allow a minimum of four hours for the final coat to cure MAINTENANCE ● Maintain polish film using a maintenance product (Clean & Buff™ or Reflect Maintainer™) following product instructions ● UNO™ is suitable for spray burnishing when diluted at 1:20 | ||
| Technical | |||
Product is for professional use only. |
|||
| Obtain Product Information Sheet |
|---|
Brand : PREM |