A range of products forming our MLCP (Multi-Lingual Cleaning Programme).
Supported by wallcharts and product guides for the modern contract
cleaner operating in today's multicultural environment.
selden lead the way in advanced cleaning solutions. iNform supports
these products with advice and guidance in the form of literature
and our interactive software.
fast drying, leaves no residue. free of chlorinated solvents or cfc's
description
* Fast drying, leaves no residue.
* Contains no chlorinated solvents or C.F.C.s.
* Dissolves away oil, grease and dirt with ease.
* Economical - C02 propellant ensures 480ml of usable product.
application
Brake Cleaner is a solvent blend designed for removal of surface dust, grease and oil from brake pads, drums, clutch plates and metal components. For all automotive and engineering uses. Rapid drying ensures that components can be returned to service immediately.
directions
Shake can well. Working in a flame and spark free area spray from 6-8 inches as required onto parts to be cleaned, catching the run off on disposable cloths.
May be sprayed onto cloths for wiping metal components if preferred. Place used cloths in an enclosed metal bin to prevent fire hazard.
NOTE:
Brake Cleaning: Test brakes before returning vehicle to the road. This product is formulated to minimise damage to rubber components, however excessive contact with these materials should be avoided.
Technical
Composition
A blend of fast drying non-chlorinated solvents
Appearance
Clear spray
Colour
Colourless
Density
0.79
Fragrance
Solvent
Stability
Two years minimum
Storage
Pressurised container. Store out of direct sunlight. Temperature must not exceed 50oC