 |
| © 2009 Selden Research Ltd. No part of this site may be reproduced without permission |
| Selden Research Ltd Staden Business Park Staden Lane Buxton Derbyshire SK17 9RZ Tel : 01298 26226 sales@selden.co.uk Registered in England No. 984285 VAT Reg GB 157511665 |
 |
 |
|||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
|||||||
 |
 |
|
||||||||
| industrial >> Silicone Aerosols |
|---|
| SILICONE SPRAY | K040 |
||
|---|---|---|---|
 |
|||
 |
|||
| description | |||
| application | As a release/antistick agent; used in plastic injection moulding, fibre glass moulding, footwear industry, ceramicware production, rubber articles, oven shelves not in excess of 315°C. Lubrication uses; for most plastic and synthetic/natural rubber or plastic bearings, textile fibres etc. | ||
| directions | Hold can as near upright as possible, approximately 20cm from the surface. Spray lightly over surface to achieve the required level of finish. Repeat this operation as required. Do not spray directly onto hot surfaces. | ||
| Technical | |||
| Composition | Pure silicone oil | ||
| Appearance | Clear spray | ||
| Colour | Colourless | ||
| Viscosity | 350 Cps | ||
| Density | 0.58 | ||
| Fragrance | Odourless | ||
| Stability | Two years minimum | ||
| Storage | Pressurised container. Store out of direct sunlight. Temperature must not exceed 50oC | ||
| Aerosol Information | |||
| Propellant | Hydrocarbon | ||
| Pressure | 60 psi | ||
| Spray Rate | 0.9 | ||
Product is for professional use only. |
|||
| Obtain MSDS |
|---|
Brand : SELDEN |
 |
| Obtain Product Information Sheet |
|---|
Brand : SELDEN |
|
|